micro-ceramic treatment for an engine with a high consumption of oil

micro-ceramic treatment for an engine with a high consumption of oil

Metal surface finisher built on high viscosity basic material, provided with polyceramic components, with excellent friction reducing and sealing effect. Its use is recommended for all worn explosion engines with high oil consumption - whether they are petrol, diesel, Wankel, gas or turbo -, and must be added to oils of the required quality.

Old Spezial has been developed for cars, engines, trucks, tractors, boat engines and heavy-duty special engines due to the resulting wear phenomena.  In most vehicles 25% of energy generated by the fuel is lost due to friction. This friction loss is reduced by Old Spezial by 60%. The engine oil forwards polyceramic microparticles to all points where friction may develop. Due to their micro sizes they get to the uneven metal friction surfaces of cylinders, pistons, bearings, rings, gears, etc., to where they get fixed and partly burnt in. In addition to the reduction of friction the integrated microparticles eliminate leakage problems. Thus the ratio of toxic gases drastically reduces in emission gases. The high viscosity carrier ensures sealing, thereby its use significantly may reduce high oil consumption, and increase the compression.

As a result of the chemical metal surface finish the product significantly increase the lifetime of the equipment. Due to the particularlylow friction coefficient of polyceramic added to the metal surface finish Old Spezial offers safety lubrication. This facilitates the inner operation of the engine and the movement of parts, which entails the increase of the engine output and fuel saving.

The polyceramic has a very great importance in modern lubrication engineering. The roughness of metal friction surfaces of engines and switchgears is very insignificant, often only 1 micron, thus larger microparticles do not adhere to the metal surface. The filtering elements of oil filters have, in general, filtering structures and filtering fineness of 15 to 25 micron (the fineness of superfine filters is 1 to 3 micron), thus they cannot filter 1 micron polyceramic microparticles of Old Spezial. Thereby Old Spezial may be used also in mainstream and partial-flow superfine filters. Today many vehicles are provided with partial-flow filtering units with a fineness of 1 to 3 microns, this is why microparticle fineness is required.

Entering into chemical reaction with metals Old Spezial tempers their materials when pressurised.  The resulting extraordinarily hard and very smooth surface resists damages caused by friction, and offers ideal terms to lubricating oils even under extreme loads. Due to the significantly reducing friction the operational temperature as well as the noise level immediately and noticeably decrease.

Since Old Spezial integrates into metals rubbing against each other, and tempers their materials, it eliminates cold-start problems, and offers a protective effect for a certain period also in case of partial oil starvation or loss of full oil pressure. It can be mixed with all synthetic and mineral based lubricating oils and greases. Oil treated with Metabond loses its lubricating quality later, and thereby oil changeintervals increase, and the environmental load reduces.

No unbeneficial changes may occur in the machines in case of proper use.

Field of application:
It is excellent for the treatment of only worn engines with high oil consumption. Diesel, petrol, gas, Wankel and turbo engines, switchgears, differential gears, drive gears and industrial equipment in a number of fields (railways, navigation, power plants, sewing machines, etc.)

Use: 
Replace 5 to 10% of the engine oil volume, and 10% of the gear oil with Old Spezial. Pour Old Spezial into the hot engine! Heat the box to 25-30C (put it into hot water), turn it upside down, and shake well before use. Operate the engine for a short time, then travel on. Not a single treatment is used, replace it preferably in case of all oil changes in the same ratio. It is assumed that an oil of the required quality is applied.

Warning:
Do not use open flame or sparkle near it!
Do not let it spray onto lacquered or painted surfaces!

Packaging units: 250 ml, 5 litre

Views: 5

Add a Comment

You need to be a member of INFINI BARTER NETWORK to add comments!

Join INFINI BARTER NETWORK

Anti-Wear Treatments for Engines

The Best Opportunity 2015

Profit Instructor Sales Representative

CRACK THE SAFE - WIN US$100,000!

PERFECT PAGES

HOW TO OBTAIN THE PUBLICATION
OF YOUR BUSINESS ON THE


Details

CASHBACK MARKETING

CashBack Marketing

recommended groups

RECOMMENDED GROUPS
Business Pre-Launch Alert join
Business in Africa join
Made in China join
Marketing Hungary csatlakozik
Marketing India join
Made in Italy aderisci
Romania Afaceri alatura-te
Украина маркетинг присоединиться

EXTRA CASH WITH YOUR SITE

MAKE SOME EXTRA CASH!
WITH YOUR WEBSITE

Details
PUBLISHERS MDADVERTISING

6 FREE INTERNATIONAL LOTTERIES

PerNum

PRIZEMANIA

A NEW WINNER EVERY 10 MINUTES!
JACKPOT, JEWELRY, SMARTPHONE, SURPRISE, CAMERA

join FREE
PRIZE MANIA

Badge

Loading…

PERFECT PAGES

© 2017   Created by krafmar.   Powered by

Badges  |  Report an Issue  |  Terms of Service